Maintaining quality
Maintaining the high quality and safety factors of our products in accordance with industry principles.
And adhering to the timetables of our customer partners, the company has the largest collection of regular colors, even wooden and 3D colors, with a license from the largest leading Italian companies in the field.
Paints, based on this, the company has been able over the past years to establish a base
Clients we are proud of. Our goal in work is to reach the highest levels of quality
Therefore, the company obtained the Qualicoat certificate and is renewing it
Annually, the company will continue to work to improve its quality and develop itself
To reach the highest levels of customer satisfaction within Egypt
Outside, as this is the company's principle.
We apply the latest international quality systems
. Gloss (Iso 2813)-1
Gloss is measured by using a gloss meter with an incident angle
for 60 degrees of light and compare the results with the values specified for each color.
Thickness (Iso 2360)-2
The thickness of the paint layer is measured using the Thickness Gauge
Film, where the thickness must not be less than the values specified in the specifications of the film
Qualicoat.
Bucholz Indentation (ISO 2815) -3
The hardness of the paint layer and its resistance to scuffs and scratches are measured during...
Indentation Hardness Tester Stages of manufacturing using a device
Bending Test (ISO 1519) - 4
The ability of the paint layer to bend and withstand the stress applied to it during the course is measured
Operation stages.
Cupping Test (ISO 1520) -5
It is done by using Cupping Tester, which tightens the paint layer
On the surface of the metal to measure whether any signs of scratches or cracks appear
On the paint surface.
Polymerization -6
It is done using Xylene and its effect on the paint layer is monitored to ensure that the process is completed
Complete leveling of artifacts inside the roasting oven.
Scratch (Iso 2409) -7
It is done using the Cross Cutter tool, which shows the extent of adhesion of the layer
Painting on the metal surface.
Impact (ASTM 2794) -8
It is done using an Impact Tester, which is a drop of a weight of 2.5 Newtons
An internal diameter of 15.9 mm from a height of 25 cm from the opposite direction of the paint
To measure the absence of any traces of scratches or cracks on the paint surface
Continuing the lasting relationship with our customers through after-sales service in order to establish the principle
Permanent fellowship between us.